Sole Fitness makes some of the most popular mid-range home treadmills, ellipticals, and bikes sold today — the F63, F80, F85, E35, and B94 are found in thousands of Tampa Bay homes. Sole equipment is built to last, but when a belt starts slipping, a console goes dark, or the incline stops responding, Heartbeat Fitness Repair provides expert on-site Sole repair throughout Tampa Bay. We service all Sole treadmill, elliptical, exercise bike, and rowing machine models at your home — no shipping, nothing to haul or ship.
Content last reviewed: September 2026
Why Tampa Bay Trusts Heartbeat Fitness Repair
6,000+ repairs completed across Tampa Bay homes, gyms, hotels, and healthcare facilities
4.9-star rating from 60 verified Google reviews
BBB Accredited Business with a clean complaint history
Common Sole Problems We Fix
We have serviced Sole equipment across Tampa Bay for years. These are the most common failure modes we see — all diagnosed and repaired on-site at your location.
Console display dim, flickering, or blank — Sole console failures are usually a backlight failure, a failed LCD panel, or a controller board fault. On the F80 and F85 in particular, the display board can fail after several years of use. We diagnose the electronics path and replace the failed board or display component.
Belt slipping or tracking off-center — A Sole treadmill belt that slips under load or drifts to one side usually has a tension or alignment issue — or a worn deck creating too much friction. We adjust belt tension, realign the belt, lubricate the deck, and replace the belt and deck if wear is advanced.
Motor controller error or speed fluctuation — Speed instability or a motor controller error on a Sole treadmill usually means the drive motor controller board is failing or the speed sensor is worn. We test the motor and controller under load, read fault codes, and replace the failed component.
Incline not working or stuck at one grade — Sole treadmill incline systems use a motorized lift actuator. When the incline stops responding, makes unusual noise, or gets stuck, the actuator motor or the incline controller is usually at fault. We diagnose and replace the affected component.
Elliptical resistance unresponsive or stuck — Sole ellipticals (E25, E35, E95) use magnetic resistance systems. When resistance won't change, the motor-driven resistance brake or the controller board is usually the cause. We test the resistance mechanism and replace the failed actuator or board.
Sole bike resistance or display failure — The Sole B94, B74, and LCR recumbent bikes can experience console display failures and resistance motor issues after extended use. We service all Sole bike models — console board replacement, resistance actuator swap, or full diagnostic — at your home.
Sole Repair Services
All repairs are performed on-site at your home, gym, or facility. Nothing to haul or ship. We bring parts for the most common Sole failures and quote everything in writing before starting work.
Sole treadmill belt and deck replacement (F63, F80, F85, F65)
Console and display board replacement
Motor controller diagnostics and replacement
Incline actuator repair and replacement
Speed sensor replacement and calibration
Sole elliptical resistance actuator replacement (E25, E35, E95)
Sole exercise bike console and resistance repair (B94, B74, LCR)
Drive motor load testing and replacement
Roller and bearing inspection
Full preventive maintenance and safety inspection
How Much Does Sole Repair Cost in Tampa Bay?
Our service call fee is $149.99–$169.99 (residential & commercial), which covers a full diagnostic and the first hour of labor. If no parts are needed, that is all you pay. If parts are required, we provide a written quote before starting any work. Total cost for Sole repairs depends on the brand, model, and part needed — complex electronic repairs may run higher. See our full pricing breakdown or call 727-512-5120.
Authorized Repair Provider
Heartbeat Fitness Repair is an authorized repair provider for Sole, sourcing manufacturer parts directly. Labor is billed at our standard rate for Sole — it isn't covered by the manufacturer. Call 727-512-5120 to discuss your Sole repair.
Sole Repair Across Tampa Bay
We provide on-site Sole repair throughout the Tampa Bay region — Pinellas, Hillsborough, Manatee, Sarasota, and Pasco counties. Same-week scheduling is available for most areas.
Sole repair in Tampa
Sole repair in St. Petersburg
Sole repair in Clearwater
Sole repair in Brandon
Sole repair in Riverview
Sole repair in Largo
Sole repair in Palm Harbor
Sole repair in Westchase
Sole repair in New Tampa
Sole repair in South Tampa
Sole repair in Dunedin
Sole repair in Tarpon Springs
Sole repair in Bradenton
Sole repair in Lakewood Ranch
Sole repair in Sarasota
Sole repair in Pinellas Park
What Tampa Bay Customers Say
“Needed my RitKeep Smith machine rack with two weight stacks built. They showed up early and worked quickly. Work product excellent. Thoughtful and communicated clearly throughout and finished ahead of estimate schedule. Awesome -would use again with any future project of this nature.”
Frequently Asked Questions
Do you repair Sole treadmills and equipment in Tampa Bay?
Yes — we provide on-site Sole repair throughout Tampa Bay, including Tampa, St. Petersburg, Clearwater, Brandon, Riverview, Bradenton, Sarasota, Wesley Chapel, Largo, Palm Harbor, and all surrounding communities. We service all Sole treadmill, elliptical, bike, and rowing machine models at your home. Call 727-512-5120.
How much does Sole treadmill repair cost?
Our service call fee is $149.99–$169.99 (residential & commercial), which covers travel, a full diagnostic, and the initial hour of labor. If parts are required — belt and deck, console board, incline actuator, or motor controller — total cost depends on the specific component and model. We provide a full written quote after the diagnostic before any work begins. Call 727-512-5120.
Which Sole models do you service?
We service all Sole treadmill models — F63, F65, F80, F85 — plus the E25, E35, E35s, E55, and E95 ellipticals, B94, B74, and LCR exercise bikes, and SR500 and SR300 rowing machines. If you have a Sole model not listed, call 727-512-5120 — we service the full Sole product line.
My Sole F80 belt is slipping — is that fixable without replacing the whole machine?
Almost always yes. A slipping belt on the Sole F80 is typically a tension, lubrication, or deck wear issue — all fixable. We diagnose first and give you an honest assessment. Call 727-512-5120.
Sole Repair Near You
Find Sole repair service in your city — on-site service with same-week scheduling throughout Tampa Bay: